Practical insights for distributors, restaurants and hotels sourcing chairs from China.
Browse by topic
New here? Start with these
Talk to the factory
Replies within 2 hours. Samples in 7–12 days.
15279438178@163.comWhatsApp +86 152 7943 8178Get a quoteMon–Sat, 9:00–18:00 (GMT+8)
- 108Flip-Top Tables: Hinge Play, Latch and Wobble
Flip-top tables live or die on hinge play, latch strength and seam flatness. The line numbers we hold, from 0.3 mm of
- 107Electropolished Stainless Chairs: Ra and Cost
Electropolishing takes 5 to 15 microns off a stainless chair frame and drops Ra from 0.8 to 0.25. What it fixes, what
- 106Booth Table Depth, Overhang and Knee Clearance
Fixed banquette seating changes table sizing: bench depth, 200 to 250 mm overhang, knee clearance and base position
- 105Cushion Wrap Layers, Crown and Corner Pleats
Seat cushions fail at the layers, not the foam: wadding weight, glue coverage, 5 to 10 mm crown and corner pleats
- 104Stainless Chair Tube Laser Cutting: Cut Quality
Kerf, dross and heat tint on laser-cut stainless tube set weld fit-up, polishing time and salt spray life. The shop
- 103Steam-Bent Chair Backs: Radius and Springback
Bend radius limits, steam time per mm, springback percentages and the compression failures that decide whether a bent
- 102Outdoor Chair Storage: Off-Season Mould Control
Closed stacks and plastic sheet push stack humidity past 80% and mould starts in 3 to 5 days. RH targets, stack gaps
- 101Chair Odour Control: Airing Days Before Shipment
New chairs carry paint, glue and foam smells. Where each odour comes from, how many airing days each finish needs
- 100Tatami Chairs on Heated Floors: Moisture and Fit
Over underfloor heating a low chair dries to 6-7% and shrinks 3 mm across a 400 mm seat. Kiln targets, PUR glue lines
- 99Bar Stool Upholstery: Disinfectant and Spill Load
Bar stool seats get wiped 4-8 times a shift and re-covered every 18-30 months. Chemical spot tests, vinyl versus PU