Chair odour control: airing days before shipment
Containers that smell like a paint shop get complained about before they get installed. Odour is controllable at the factory with time and moving air, and the schedule behind it is worth knowing before you book the vessel.
Published by JPChairs · Chair manufacturer in Foshan, China · 2026-11-17
Where the smell actually comes from
New-furniture smell is not one chemical but four, and each one clears on a different clock.
- Solvent-borne lacquer off-gasses for days: a fresh coat carries 300 to 800 mg/m3 of VOC in the first 24 hours, falling to double digits by day 7.
- Contact adhesive used on foam and lining holds solvent for 3 to 5 days and is the sharpest of the four smells; spray grades clear faster than brush grades.
- PU foam carries catalyst residue, mostly amine, which reads as a fishy note and fades 40 to 60% in the first 72 hours off the slab.
- Corrugated board and carton ink add their own note, which is why a chair can smell worse packed than open-racked.
Airing days by finish type
Airing time is set by the slowest component on the chair, and the spread between finishes is wider than buyers expect.
- Powder-coated metal frames need the least: 1 to 2 days on open racks after cure, since the coating is solvent-free from the oven onward.
- Water-based finished wood sits in the middle at 3 to 5 days, while solvent lacquer needs 7 to 10 days before the note drops to what most buyers accept.
- Fully upholstered chairs take 5 to 7 days in total, driven by foam that should rest 48 to 72 hours off the slab before it is cut and glued.
- We run finishing and airing as connected stages in the factory curing and airing bays, so the clock starts when the last coat cures, not when the order is booked.
Why sealed cartons keep the smell in
Cartons are designed to protect chairs in transit, and the same seal that keeps out dust keeps in VOC.
- Chairs packed on day 3 still vent into the carton for days; opened after 30 days at sea, they smell like the factory floor they left.
- Vented cartons with 20 mm holes drop trapped TVOC by roughly 30 to 40%, at the cost of some dust pickup, which matters more for fabric seats.
- Open-rack airing at 200 to 400 chairs per bay, with air moving past every frame, is the only method that actually clears the slow components.
- Destination matters: a hotel fitting out in summer heat smells harder at day 1 than the same chairs installed in winter.
How odour is measured and signed off
Smell can be graded like colour, and the two scales below are what we report against.
- Chamber tests on finished chairs run against EN 717-1 for formaldehyde, with 0.124 mg/m3 as the E1 line most markets accept.
- Odour intensity is graded on a 1 to 6 scale under VDA 270 by a trained panel; grade 3 or better is the pass line we write into contracts.
- Sampling is one chair per 100, rested 24 hours in a closed 1 m3 chamber before scoring, and the report ships with the documents.
What skipping the airing schedule costs
The cost of a compressed schedule never shows on the invoice; it shows at installation.
- Restaurants that open on day 1 with chairs at odour grade 4 to 5 get complaints that no amount of ventilation fully clears for a week.
- Sites are usually told to ventilate 48 hours before soft furnishings go in, and chairs still off-gassing extend that window by 3 to 5 days of lost booking.
- Airing bays cost floor space, not labour: holding 300 chairs for 7 extra days occupies 40 to 50 square metres, which is cheaper than one claim.
- Replacing a batch over odour complaints by air freight has no rational version; once installed, the only real fix is time.
Order lines that prevent the complaint
Odour control is mostly specified before production, not fixed after it.
- Specify water-based or UV-cured finishes on wood and powder coat on metal; both cut airing days by 3 to 5 against solvent lacquer.
- Ask for certified low-emission foam, or at least a declared foam rest of 48 to 72 hours before cutting.
- Write the odour grade and the sampling rate into the purchase order so the report means the same thing to both sides.
- The OEM odour and VOC specifications we work to cover finish choice, foam rest, vented cartons and the chamber report as one clause rather than four emails.


